GEM/2026/B/7719024

N/A

Cut and remove the weak corroded footrest of the service pump make a new one from the provided plate and conduct a trial.,Removing the pan floor and damaged weak vapor pipes 1100 mm in diameter per meter and installing a new one using the provided plate and testing it.,Removing the pan floor and damaged weak vapor pipes 900 mm in diameter per meter and installing a new one using the provided plate and testing it.,Manufacture and install suction pipes for injection and cooling tower spray pumps according to the instructions.,Remove the worn out shell plate of the pans and replace it with a 10 12 mm MS plate and conduct a trial.,Remove the umbrella on the pan and install a new one using the provided 6 8 mm plate and conduct a trial.,Cutting and removing the neck cone ring portion of the pan and replacing it with the provided 10 12 mm MS plate by bending it welding it inside and out and filling it with water for a trial.,Removing the old neck angles channels from the pan shell and roof and stiffening them with t

https://bidplus.gem.gov.in/doc_cppp/uwZU225WUSgsw1vwujbmvyZhUgMfElT67ZXMceovjZ25OhZJEDjzP1xs8vw68BueTeKyY05rnye0Nih3DL_mHA

Karan Singh

247232,247232,247232,247232,247232,247232,247232,247232,247232,247232,247232,247232,247232,247232,247232,247232,247232,247232,247232,247232,247232,247232,247232,247232,247232,247232,247232,247232,247232,247232,247232,247232,247232,247232,247232,247232,247232,247232,247232,247232,247232,247232,247232,247232,247232,247232,247232